Andis is a a manufacturer of clippers and trimmers. Its broad portfolio of products is mostly for cutting hair whether professionally or for home use. With repeated use, the blade of an Andis clipper or trimmer will get dull. To get the same performance from the product, the blade will need to be sharpened. It is no use sharpening the blade of a damagedAndis clipper or trimmer. Sharpening extends the lifeand usability of an Andis blade.
Instructions
1. Turn off the Andis.Clean the blades of the Andis with a soft cloth. Even though the blades are dull, wipe them carefully.
2. Remove the screws attaching the blades to the motorized razor with a screwdriver.
3. Remove the blades of the Andis.Return only the moving blade to the springs
4. Sharpen the Andis blade on the blade sharpener. This is done by moving the sharpener gently but up and down the face of the blade.
5. Stop sharpening the blade only when it shines and looks sharp.Touch the teeth of the blade gently to ensure that it is sharp.
6. Remove the guide from the blade.Work the guide blade up and down the face of the blade sharpener. This should go on for a minute until the guide blade is sharp.
7. Re-screw the blade back into the guide.Screw the blades back into the Andis and reassemble.
8. Ensure the blades are properly arranged and functioning before cutting again with the Andis.
Tags: Andis blade, back into, blade sharpener, blade sharpener This, blades Andis
No comments:
Post a Comment